Engine cooling – coolant hoses and pipes
- Make
- Fiat
- Model
- Ducato Factory Service Manual
- Year
- 2002–2006
- Section
- Engine › Engine cooling – coolant hoses and pipes
‹ Prev Engine cooling – water pump and thermostatNext › Engine component miscellaneous drives – crankshaft pulley and idler pullies
Tightening torquesEngine cooling – coolant hoses and pipes
ENGINE COOLING – COOLANT HOSES AND PIPES
| Value - daNm | Fastening | Component | Ø | Validity |
|---|---|---|---|---|
| Bolts | THERMOSTAT | 2.3 JTD 16V | ||
| 1 | Bolts | RIGID PIPE BETWEEN SLEEVES FROM RADIATOR TO THERMOSTAT | M6 | 2.3 JTD 16V |
| 2.5 | Bolts | RIGID PIPE BETWEEN SLEEVES FROM RADIATOR TO THERMOSTAT | M8 | 2.3 JTD 16V |
| 4 | Connector | INJECTOR FUEL MANIFOLD (DIESEL) | M16 | 2.3 JTD 16V |
| Value - daNm | Fastening | Component | Ø | Validity |
|---|---|---|---|---|
| Bolts | THERMOSTAT | 2.3 JTD 16V | ||
| 1 | Bolts | RIGID PIPE BETWEEN SLEEVES FROM RADIATOR TO THERMOSTAT | M6 | 2.3 JTD 16V |
| 2.5 | Bolts | RIGID PIPE BETWEEN SLEEVES FROM RADIATOR TO THERMOSTAT | M8 | 2.3 JTD 16V |
| 4 | Connector | INJECTOR FUEL MANIFOLD (DIESEL) | M16 | 2.3 JTD 16V |
| 2,5 | Nut | COOLANT PUMP RIGID INLET PIPE | M8 X 1,25 | 2.8 JTD 8V |
‹ Prev Engine cooling – water pump and thermostatNext › Engine component miscellaneous drives – crankshaft pulley and idler pullies
Parts & tools for this job For 2002 Fiat Ducato
- PARTEngine gasket setSearch: Fiat Ducato 2002 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.