Cylinder head(s) – cylinder head/s - various operations
- Make
- Fiat
- Model
- Ducato Factory Service Manual
- Year
- 2002–2006
- Section
- Engine › Cylinder head(s) – cylinder head/s - various operations
‹ Prev Cylinder head(s) – single cylinder head - removing and refittingNext › Crankcase sump and covers – crankcase oil sump
Tightening torquesCylinder head(s) – cylinder head/s - various operations
CYLINDER HEAD(S) – CYLINDER HEAD/S - VARIOUS OPERATIONS
| Value - daNm | Fastening | Component | Ø | Validity |
|---|---|---|---|---|
| 1,6 | Nut | CAMSHAFT CAPS | 2.0 16V | |
| 1,6 | Nut | CAMSHAFT CAPS | 2.0 16V | |
| 1,6 | Nut | CAMSHAFT CAPS | 2.0 16V |
| Value - daNm | Fastening | Component | Ø | Validity |
|---|---|---|---|---|
| 1,8 | Nut | CAMSHAFT SUPPORTS | M8 | 2.8 JTD 8V |
| 1,8 | Nut | CAMSHAFT SUPPORTS | M8 | 2.8 JTD 8V |
| 0.75 | Nut | INLET AND EXHAUST CAMSHAFT FRONT COVER | M6 | 2.8 JTD 8V |
| 2,5 | Bolt | TIMING DUCT PULLEY | M8 | 2.8 JTD 8V |
| 1,8 | Bolt | THERMOSTAT | M8 | 2.8 JTD 8V |
| Value - daNm | Fastening | Component | Ø | Validity |
|---|---|---|---|---|
| 1,0 | Bolt | CYLINDER HEAD EXTENSION FASTENERS | 20 JTD 8V | |
| 1,0 | Bolt | CYLINDER HEAD EXTENSION FASTENERS | 20 JTD 8V | |
| 4,3 | Bolt | BRAKING SYSTEM BRAKES | 20 JTD 8V | |
| 4,3 | Nut | BRAKING SYSTEM BRAKES | 20 JTD 8V | |
| 4,3 | Nut | TIMING PULLEY FLANGE | 20 JTD 8V | |
| 2,3 | Spark plug | GLOW PLUGS | 20 JTD 8V | |
| 2,3 | Nut | INJECTORS(DIESEL) | 20 JTD 8V |
‹ Prev Cylinder head(s) – single cylinder head - removing and refittingNext › Crankcase sump and covers – crankcase oil sump
Parts & tools for this job For 2002 Fiat Ducato
- PARTEngine gasket setSearch: Fiat Ducato 2002 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.