FRONT TRANSMISSION SHAFT - R.R.

Operation 2410A32 · TRANSMISSION SHAFT BETWEEN THE TRANSMISSION AND THE DIFFERENTIAL

2.0 16V, 2.8 JTD 8V · 4X4

Removing

- Position the vehicle on the lift.

- Loosen the greaser for the universal joint securing the front propeller shaft to the rear drive idler unit.

1. Undo the fixing bolts (1a) and move the safety bracket (1b) aside.

2. Loosen the bolts fixing the front propeller shaft universal joint to the rear drive idler unit.

- Unscrew the grease fitting for the universal joint securing the front propeller shaft to the viscous coupling flange.

1. Unscrew the bots securing the universal joint securing the front propeller shaft to the viscous coupling flange.

2. Remove the front propeller shaft.

Refitting

- Fit the propeller shaft safety bracket in place and tighten the fixing bolts.

- Fit the propeller shaft and tighten the bolts securing the front propeller shaft universal joint to the viscous coupling flange.

- Tighten the universal joint grease fitting.

- Tighten the bolts fixing the front propeller shaft universal joint to the rear drive idler unit.

- Tighten the universal joint grease fitting.

- Remove the vehicle from the lift.