Shell with rear traction transmission shaft - r.r.
- Make
- Fiat
- Model
- Ducato Factory Service Manual
- Year
- 2002–2006
- Section
- Transmission shaft › Shell with rear traction transmission shaft - r.r.
‹ Prev Viscous joint frontor rear support (single) - r.r. for permanent versionNext › Drive shaft with joints (one), l/h or r/h - r + r
Transmission (4x4)Shell with rear traction transmission shaft - r.r.
SHELL WITH REAR TRACTION TRANSMISSION SHAFT - R.R.
Removing
Op. 2410A18 TRANSMISSION WITH JOINTS INCLUDED - R.R.
1. Undo the bolts (1a) securing sleeve (1b) to the viscous coupling assembly (1c).
1. Separate propeller shaft (1a) from sleeve (1b).
Refitting
- Fit the transmission shaft in its seat on the sleeve.
- Fit the sleeve with the propeller shaft to its seat on the differential coupling assembly and tighten the fixing bolts.
‹ Prev Viscous joint frontor rear support (single) - r.r. for permanent versionNext › Drive shaft with joints (one), l/h or r/h - r + r
Parts & tools for this job For 2002 Fiat Ducato
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Ducato
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.