REAR BACKREST CATCH DEVICE (ONE) - R+R

Operation 7050A42 · REAR SEAT ASSEMBLY

Removing

Op. 7050A15 SPLIT REAR SEAT RIGHT BACKREST - R.R.

- If it is necessary to work on the left backrest, remove the following components

Op. 7050A22 REAR SEAT CUSHION - R+R

Op. 7050A13 SPLIT REAR SEAT LEFT BACKREST - R.R.

1. Remove the rubber cover.

2. Undo the retaining ring nut using a polygonal spanner.

3. Remove the washer.

4. Remove the clip (4a) releasing it from the housing (4b).

Refitting

- Check that the ring nut, the washer and the clip are not damaged.

- Place the clip in position and fit it in the housing.

- Place the washer in position.

- Screw in and tighten the retaining ring nut.

- Fit the rubber cover.

Op. 7050A13 SPLIT REAR SEAT LEFT BACKREST - R.R.

Op. 7050A22 REAR SEAT CUSHION - R+R

Op. 7050A15 SPLIT REAR SEAT RIGHT BACKREST - R.R.