Rear seat cushion - r+r

Make

Fiat

Model

Grande Punto Factory Service Manual

Year

2005–2012

Section

Rear seats › Rear seat cushion - r+r

Body fittingsRear seat cushion - r+r

REAR SEAT CUSHION - R+R

Operation 7050A22 · REAR SEAT ASSEMBLY

Removing

- Move thecorresponding front seat as far forward as necessary.

1. Undo the bolts.

2. Remove the cushion (2a) releasing the pin (2b) from the housing (2c).

Refitting

- Check that the cushion is not damaged.

1. Fit the cushion in place attaching the pin in the housing.

2. Tighten the bolts.

Component	Fastening	dia	Value (daNm)	Validity
Rear seat cushion	Bolt	M8x22.5	2.25 ÷ 2.75

- Place the corresponding front seat in the middle position.

17 Body & interior