HANDBRAKE LEVER - R+R

Operation 3380A10 · HANDBRAKE CONTROL AND LINKAGE

Removing

- Disconnect the negative battery terminal.

Op. 7040L22 REAR COVER ON TUNNEL - R.R.

1. Loosen the handbrake lever cable adjustment nut.

2. Disconnect the cables from the anchor.

- Partly prise up the handbrake lever protection.

1. Disconnect the electrical connection from the handbrake switch.

2. Undo the bolts (2a) and remove the handbrake lever (2b).

1. Prise up and remove protection (1a) and switch (1b) from the handbrake lever.

Refitting

- Fit the protection and switch on the handbrake lever.

- Place the handbrake lever in its housing and secure it by tightening the nuts to the recommended torque.

- Connect the electrical connection of the handbrake switch.

- Connect the cables to the anchor.

Op. 7040L22 REAR COVER ON TUNNEL - R.R.

Op. 3380A04 HANDBRAKE - ADJUST TRAVEL

- Connect the negative battery terminal.