Check:

- that the panel brightness adjustment has not been selected;

- that the mode button has not been pressed;

- that dashes are not displayed in place of the temperature;

- that failure messages have not been displayed

1. Display shows other information

2. There are dashes instead of the temperature.

1. Restore display conditions using the control panel

2. Move on to Step 2

Check that the connections for the outside temperature sensor in the Driver''s Door Node are correct.

Check that the outside temperature sensor is working properly

1. Connections defective

2. Temperature sensor defective

1. Restore the correct connections, if necessary, replace the wiring see wiring diagram

See E6020 AIR CONDITIONING

2. Replace the temperature sensor

Op. 7005R30 ELECTRICALLY CONTROLLED DOOR MIRROR (ONE) - R+R

Connect the Examiner diagnostic equipment to the diagnostic socket.

Check:

- that there are no faults in the instrument panel

- that there are no faults in the driver''s door node

1. Instrument panel defective

2. Driver''s door node defective

1. Replace instrument panel

Op. 5560B10 CONTROL PANEL - R+R

2. Replace the driver''s door node

Op. 5505A42 CONTROL UNIT (DIGITAL NETWORK NODE) IN DRIVER'S DOOR - R.R.