Display module no signal - to check panel
- Make
- Fiat
- Model
- Grande Punto Factory Service Manual
- Year
- 2005–2012
- Section
- Instrument panel › Display module no signal - to check panel
Fault diagnosisDisplay module no signal - to check panel
DISPLAY MODULE NO SIGNAL - TO CHECK PANEL
The display module is turned on by the panel at the key on and displays information for the user
| Results of the tests | ||||
| 1 | CHECK USING DIAGNOSTIC EQUIPMENT | All OK | Problems encountered | Operation |
|---|---|---|---|---|
| Connect the diagnostic equipment and check the operation of the display segments at the INSTRUMENT PANEL NODE by activating the Autotest function in active diagnosis | Move on to Step 2 | One or more segments does not come on | Replace the Instrument Panel | |
| 2 | CHECK ON CORRECT OPERATION | All OK | Problems encountered | Operation |
| Check that the fault is no longer present | End of diagnosis | The fault persists | Contact technical service for further information on the problem | |
Parts & tools for this job For 2005 Fiat Grande Punto
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.