General failure warning light not working
- Make
- Fiat
- Model
- Grande Punto Factory Service Manual
- Year
- 2005–2012
- Section
- Instrument panel › General failure warning light not working
‹ Prev Seat belt not fastened warning light not workingNext › General failure warning light on constantly
Fault diagnosisGeneral failure warning light not working
GENERAL FAILURE WARNING LIGHT NOT WORKING
Even if one of the functions signalled by the general failure warning light is faulty, the warning light in the instrument panel does not come on
The following functions cause the activation of the general failure warning light:
- Inertia switch (FIS) operation
- Windscreen wiper automatic operation not available
- Parking sensor failure (if fitted)
- Dusk sensor failure (if fitted)
- Engine oil pressure sensor failure
- Brake pad wear
- Rain sensor failure (if fitted)
- Exterior lights failure: side light, number plate light, rear fog lamp, direction indicator, brake light
- Pollution filter blocked (JTD version only)
| Results of the tests | ||||
| 1 | CHECK USING DIAGNOSTIC EQUIPMENT | All OK | Problems encountered | Operation |
|---|---|---|---|---|
| Connect the diagnostic equipment and check the operation of the general failure warning light in active diagnosis at the INSTRUMENT PANEL NODE | End of diagnosis | The warning light is not activated | Replace the Instrument Panel | |
‹ Prev Seat belt not fastened warning light not workingNext › General failure warning light on constantly
Parts & tools for this job For 2005 Fiat Grande Punto
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Grande Punto
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.