22 · Diagnostics

City warning light on

Make: Fiat
Model: Grande Punto Factory Service Manual
Year: 2005–2012
Section: Instrument panel › City warning light on

‹ Prev Clock not working Next › City warning light off (initial test not carried out)

Fault diagnosisCity warning light on

CITY WARNING LIGHT ON

After the initial test, the CITY warning light on the Instrument Panel Node remains on.

0	PRELIMINARY CHECK	All OK	Problems encountered	Operation
		Results of the tests
	Press the button repeatedly to check whether the problem is the result of an incorrect setting and check whether the LED in the button changes status	End of diagnosis	1.Incorrect CITY function setting 2.The LED in the button does not change status 3.The LED in the button comes on and then goes out	1.Restore the correct function 2.Move on to Step 6 3.Move on to Step 1
1	CHECK USING DIAGNOSTIC EQUIPMENT	All OK	Problems encountered	Operation
	Using an Examiner check, in Instrument Panel mode, that there are no errors and that the parameters are present.	Move on to Step 5	1. Impossible to connect with the Instrument Panel control unit 2. Presence of errors	1. Move on to Step 2 2. Continue following the instructions on the diagnostic instrument
2	ELECTRICAL POWER SUPPLY CHECK	All OK	Problems encountered	Operation
	Check the electricity supply to the Instrument Panel Node is correct.	Move on to Step 3	Fault in positive electrical supply and/or earth	Replace defective component (in the case of a fuse, find out what caused it to blow).
3	CHECK ELECTRICAL CONNECTIONS	All OK	Problems encountered	Operation
	Check the wiring between the Body Computer and the Instrument Panel. In particular, check that each individual pin is properly connected See Wiring Diagram See E7045 ELECTRIC STEERING	Move on to Step 4	Electrical connections not operational	Renew the damaged electrical connections
4	CHECK USING DIAGNOSTIC EQUIPMENT	All OK	Problems encountered	Operation
	Using the Examiner, check the possibility of connecting with the Instrument Panel Node	Move on to Step 6	Impossible to connect with the Instrument Panel control unit	Replace the Instrument Panel Op. 5560B10 CONTROL PANEL - R+R
5	ACTIVE DIAGNOSIS CHECK	All OK	Problems encountered	Operation
	With the Examiner in the Instrument Panel Node ambient check that the CITY warning light is correctly activated/deactivated in Active Diagnosis	Move on to Step 6	The warning light is not activated/deactivated	Replace the Instrument Panel Op. 5560B10 CONTROL PANEL - R+R
6	CHECK USING DIAGNOSTIC EQUIPMENT	All OK	Problems encountered	Operation
	Using the Examiner in Body Computer Node mode check that there are no errors and that the CITY button status has changed.	Move on to Step 5	1. Impossible to connect to the Body Computer control unit. 2. Presence of errors 3. The parameters do not change	1. Move on to Step 7 2. Continue following the instructions on the diagnostic instrument 3. Move on to Step 10
7	ELECTRICAL POWER SUPPLY CHECK	All OK	Problems encountered	Operation
	Check the electricity supply to the Body Computer Node is correct.	Move on to Step 8	Fault in positive electrical supply and/or earth	Replace defective component (in the case of a fuse, find out what caused it to blow)
8	CONNECTIONS CHECK	All OK	Problems encountered	Operation
	Check the continuity of the wiring between the CITY button and the Body Computer Node See Wiring Diagram See E7045 ELECTRIC STEERING	Move on to Step 9	Electrical connections not operational	Renew the damaged electrical connections
9	CHECK USING DIAGNOSTIC EQUIPMENT	All OK	Problems encountered	Operation
	Use an Examiner to check the possibility of connection to the Body Computer Node	Move on to Step 10	Impossible to connect to the Body Computer control unit.	Replace the Body Computer Node Op. 5505A32 BODY COMPUTER - R.R
10	CONNECTIONS CHECK	All OK	Problems encountered	Operation
	Check that the CITY button is working properly and that the wiring with with the Body Computer Node is correct See Wiring Diagram See E7045 ELECTRIC STEERING	End of diagnosis	1. Button faulty 2. Electrical wiring not working	1. Replace the defective component 2. Repair the damaged wiring

‹ Prev Clock not working Next › City warning light off (initial test not carried out)

Parts & tools for this job For 2005 Fiat Grande Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.