Fog lights not working
- Make
- Fiat
- Model
- Grande Punto Factory Service Manual
- Year
- 2005–2012
- Section
- Lights › Fog lights not working
Fault diagnosisFog lights not working
FOG LIGHTS NOT WORKING
The fog lights are not working;
The fog lights are controlled by the Body Computer Node via a relay located in the Engine Compartment Junction Unit.
The lights can be switched on/off by the button in the left control panel
| Test results | ||||
| 1 | CHECK USING DIAGNOSTIC EQUIPMENT | All OK | Problems encountered | Operation |
|---|---|---|---|---|
Connect the Examiner diagnostic equipment to the diagnostic socket and check the following at the Body Computer Node: - error B1006 not present | Move on to Step 2 | Presence of error B1006 | Restore the correct connections | |
| 2 | FOG LIGHTS RELAY CHECK | All OK | Problems encountered | Operation |
| Check the condition of the fog lights relay (relay T14 in the engine compartment junction unit) | Move on to Step 3 | Relay defective | Replace the relay | |
| 3 | CHECK ON OPERATION OF ENGINE COMPARTMENT JUNCTION UNIT FUSE | All OK | Problems encountered | Operation |
| Check that fuse F31 in the engine compartment junction unit is working properly | Move on to Step 4 | Fuse blown | Replace the fuse (and find out what could have caused it to blow) | |
| 4 | CHECK USING DIAGNOSTIC EQUIPMENT | All OK | Problems encountered | Operation |
| Keeping the diagnostic equipment connected, check in active diagnosis that the fog lights are working properly | Move on to Step 7 | Main beam headlamps not working | Move on to Step 5 | |
| 5 | BODY COMPUTER CONNECTIONS CHECK | All OK | Problems encountered | Operation |
| Check for distorted terminals or missing connections in the Body Computer | Move on to Step 6 | Missing connections / bent pins | Renew the correct connections | |
| 6 | CHECK ON OPERATION OF BULBS | All OK | Problems encountered | Operation |
| Check that the fog lights are working properly | Move on to Step 8 | Filament for one of the bulbs broken | Replace the bulb | |
| 7 | FOG LIGHTS ON CONTROL CHECK | All OK | Problems encountered | Operation |
| Check that the fog lights control in the left control panel is working | Move on to Step 8 | On/off button faulty | Replace the control panel | |
| 8 | CHECK ON CORRECT OPERATION | All OK | Problems encountered | Operation |
| Check that the fault is no longer present | End of diagnosis | Fault persists | Replace Body Computer | |
Parts & tools for this job For 2005 Fiat Grande Punto
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Grande Punto
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.