Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Grande Punto Factory Service Manual (2005-2012)22 · Fault diagnosis
22 · Diagnostics

Side lights/no. plate lights not working

Make
Fiat
Model
Grande Punto Factory Service Manual
Year
2005–2012
Section
Lights › Side lights/no. plate lights not working
Fault diagnosisSide lights/no. plate lights not working

SIDE LIGHTS/NO. PLATE LIGHTS NOT WORKING

When the side light switch is operated, the side light/number plate lights do not operate;

the voltage to turn on the side lights and number plate lights is supplied directly by the Body Computer Node. The lights may be operated by means of the controls:

1. EXTERIOR LIGHT CONTROL (on stalk) C.L.E.

- Side lights

2. PARKING LIGHT CONTROL ("PARK" key)

- parking lights

3. COMMAND FROM DUSK SENSOR

4. FOLLOW ME HOME COMMAND FROM STALK

Test results
1CHECK USING DIAGNOSTIC EQUIPMENTAll OKProblems encounteredOperation
Connect the Examiner diagnostic equipment to the diagnostic socket on the Body Computer Node and and check for errors.Move on to Step 2Presence of errorsContinue following the instructions for the diagnostic equipment
2ELECTRICAL SYSTEM CHECKAll OKProblems encounteredOperation

- Check the continuity and the insulation of the wiring between the Exterior Lights Control and the Body Computer Node

See E2010 SIDE LIGHTS / NO. PLATE LIGHTS

- Check the stalk connection to earth

Move on to Step 3

1. Wiring between stalk and Body Computer interrupted

2. Lighting stalk earth reference interrupted

1. Restore the electrical connection

See E2010 SIDE LIGHTS / NO. PLATE LIGHTS

2. Restore the electrical connection

See E2010 SIDE LIGHTS / NO. PLATE LIGHTS

3EXTERIOR LIGHTS CONTROL CHECKAll OKProblems encounteredOperation

Check the control on the stalk is intact

See E2010 SIDE LIGHTS / NO. PLATE LIGHTS

Also check the operation of the body computer

End of diagnosis

1. Stalk switch not working

2. Body Computer defective

1. Replace the steering column switch unit

Op. 5550A10 STALK UNIT ASSEMBLY - R+R

2. Replace body computer

Op. 5505A32 BODY COMPUTER - R.R

Parts & tools for this job For 2005 Fiat Grande Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.