Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Grande Punto Factory Service Manual (2005-2012)19 · Wiring diagrams and electrical functions
19 · Electrical

Heater - description

Make
Fiat
Model
Grande Punto Factory Service Manual
Year
2005–2012
Section
Climate control system › Heater - description
Wiring diagrams and electrical functionsHeater - description

HEATER - DESCRIPTION

DESCRIPTION

The vehicle climate control system is achieved through the duct/distributor unit and heater.

The climate control system is controlled by means of three control knobs in the dashboard:

- the left knob controls the hot and cold air mixing flap via mechanical controls;

- the central knob regulates air ventilation at four different speeds by means of an electrical control;

- the right knob controls the opening of the flaps that regulate the distribution of air flows;

There are 2 buttons above the knobs:

- the first from the right engages the recirculation function through an electrically-controlled motor

- the second button switches on the defrosting of the heating rear windscreen and the door mirrors

See E3030 HEATED REAR WINDSCREEN AND DOOR MIRROR DEFROSTING

For more details,

See descriptions 5020 HEATER

Parts & tools for this job For 2005 Fiat Grande Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.