Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Grande Punto Factory Service Manual (2005-2012)19 · Wiring diagrams and electrical functions
19 · Electrical

Reversing lights - description

Make
Fiat
Model
Grande Punto Factory Service Manual
Year
2005–2012
Section
Exterior lighting › Reversing lights - description
Wiring diagrams and electrical functionsReversing lights - description

REVERSING LIGHTS - DESCRIPTION

DESCRIPTION

The vehicle is equipped with a white reversing light located in the rear bumpers, on the right.

It is activated each time reverse gear is engaged: this information is received via a switch located on the outside of the gear casing.

The reversing light circuit is supplied by an ignition-operated relay and protected by a fuse in the engine compartment control unit.

The reverse engagement signal is also acquired by the engine control unit, sent via the CAN network to the Body Computer, which forwards the information to the parking etc. sensor control unit for automatic rear wiper operation

See E3021 REAR WINDOW WASH/WIPE

See E3090 PARKING SENSOR

In the provision for aftermarket navigation system wiring, the information is sent directly via an appropriate line

See E4090 NAVIGATOR

Parts & tools for this job For 2005 Fiat Grande Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.