Bonnet lid opening control - repair

Operation 7025A26 · Bonnet lid

Removing

- 7025A34 bonnet lid lock (one) - r+r or repair

- 7025A24 boot lid opening lever - r+r

1. Release the control cable retaining bands.

2. Connect a probe to the inner end of the control cable. This operation is necessary to make it easier to refit the control cable.

3. Release the cable from the engine compartment side leaving the probe in its place.

Refitting

Check that the control cable is undamaged.

Refit the control cable inserting it in the engine compartment and using the probe.

Remove the probe from the inner end of the cable.

Reposition the retaining bands.

- 7025A24 boot lid opening lever - r+r

- 7025A34 bonnet lid lock (one) - r+r or repair

Check that the bonnet lid is opening and closing properly.