Bonnet lid - square

Operation 7025A10 · Bonnet lid

Lift the bonnet lid.

1. If necessary, adjust the buffer blocks.

2. If necessary, adjust the lock position. Refer to op. 7025A34 bonnet lid lock (one) - r+r or repair.

1. If necessary, undo the hinge bolts and adjust the bonnet position. The arrows indicate possible movements.

Tighten the hinge bolts.

If the adjustments described above are insufficient, adjust bonnet lid hinge position as described below.

Refer to op. 5050B34 windscreen wiper arm/s complete with blade - r+r

Refer to op. 7210E22 R.R. WINDSCREEN BASE TRIM

Refer to op. 7035A54 WINDSCREEN BASE LOWER SUPPORT (one), left or right for attaching windscreen protective grille - R.R.

1. Loosen the bolts with nut (1a) securing the hinges (1b) and adjust the position until the bonnet lid is aligned. The arrows (1c) indicate the possible movements.

2. Tighten the bolts and nut.

Touch up the paintwork in the hinge area.

Refer to op. 7035A54 WINDSCREEN BASE LOWER SUPPORT (one), left or right for attaching windscreen protective grille - R.R.

Refer to op. 7210E22 R.R. WINDSCREEN BASE TRIM

Refer to op. 5050B34 windscreen wiper arm/s complete with blade - r+r