Heater with manual controls

Heater with manual controls

- unscrew arrowed screws that retain front of control mount (7) to the trim of central console, which is an integral part of the instrument facia;

Detail of control assembly front panel

Detail of central console without front panel

• remove the horn button cover (8) from its housing by undoing round the edge in order to release the three strips (9) with double paired tooth profile from their seats (arrowed) on steering wheel (10). Then disconnect the two connectors (11) from underneath;
• position the front wheels in a straight line and then, after unscrewing nut (12) pull steering wheel (10) off the splined end of the top steering control shaft;
• unscrew bolts (13 and 14) that fasten the top guard (15) and bottom guard (16) together and to the top steering control shaft assembly;
• unscrew screws (17) that retain control panel (18) to the instrument facia after removing panel from its seat and disconnecting the various connectors (19) from behind.;