Heater with manual controls (page 3 of 4)

NOTE The operations described and illustrated on this page are reserved solely for vehicles with top tunnel trim.

• remove box cover (1) of radio compartment, followed by plate (2) and plug (3) (noting that the latter is hinged at the rear) that are located on the rear part of the tunnel trim;
• unscrew screws (4) that fasten top part (5) of tunnel trim to underlying bottom part (6) and trim of central console (7);
• release top trim (5) from bottom trim (6), noting that side ridges of central part of first part are inserted in arrowed seats;
• working from underneath the top trim (5) undo tabs of frame retaining bottom of cone trim (8) protecting gear lever in order to release;
• unscrew nuts (9) retaining tunnel rear trim (10) and rear part of front lower trim (6) to the vehicle floor pan;
• unscrew bolts (11) that fasten tunnel bottom front trim (6) to trim of central console (8);
• lift rear trim (10) and remove lower front trim (6);