Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)08 · 50 Auxiliary units
08 · General

Heater with manual controls (page 4 of 4)

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Heater with manual controls
50 Auxiliary unitsHeater with manual controls · page 4 of 4
View from under the dashboard showing the steering top shaft assembly and instrument panel (12) with arrows indicating fastening nuts.
  • unscrew nuts that fasten steering top shaft assembly to body mount that are tightened onto stud screws arrowed in the bottom figure;
  • position above assembly on vehicle floor after releasing the various electric cable connectors;
Close-up detail of a bracket or mounting point.
Close-up detail of a hexagonal headed socket screw.
View of the lower section of the instrument panel (12) showing side brackets with arrows indicating fastening screws.
  • unscrew the hexagonal headed socket screws arrowed in the two figures alongside that fasten lower, central and side brackets of instrument panel (12) to heater distributor assembly and body brackets respectively;
Interior view of the dashboard with the instrument facia (12) removed, showing wiring clips (A) and aerial lead (B).
  • remove instrument facia (12) from its seat and position on front seat cushions (as shown in figure alongside);
  • lastly, in order to facilitate access to the heater distributor assembly, remove the clips that fasten wiring (A) of the electric leads that fasten the aerial to the body from the right hand end of the facia and release lead (B) of the aerial.

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.