Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)10 · 70 Bodywork
10 · Body & interior

Removing-refitting wing (page 3 of 4)

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Replacing body panels
70 BodyworkRemoving-refitting wing · page 3 of 4
View of the inner wheel arch area showing mounting points and components.
Close-up of the wing edge with adhesive sealant, accompanied by two small icon squares.

using a suitable tool as shown in the diagram, separate the wing from the adhesive sealant along the entire contact perimeter with the bodyshell;

View of the wing being separated from the vehicle body, revealing the sealant line.
Two small icon squares indicating tools or procedures.
View of the removed wing panel resting near the wheel arch.

remove the wing from the bodyshell;

A person using a scraper tool to remove old sealant from the housing on the vehicle body.

remove the sealant using a scraper from the housing in the vehicle, taking care not to damage the paintwork;

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.