Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)02 · 10 Engine
02 · Engine

Refitting (page 2 of 2)

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Crankcase sump and covers (899)
10 EngineRefitting · page 2 of 2
Fastening Component Ø Value (daNm)
- Nut CRANKSHAFT PULLEY M18 9.8
  • Remove the engine flywheel retaining tool
Name Code
- Countertorque 1.867.029.000
  • Mount the gear case guard.
  • Tighten the gear case guard screws to correct torque
Fastening Component Ø Value (daNm)
- Screw GEAR CASE GUARD M6 0.5
  • Assemble the alternator / water pump belt.
  • Follow Op. 1092B54Alternator / water pump BELT - Tension adjustment.
  • Assemble the right supplementary wheel housing (see Op. 7055B42 SUPPLEMENTARY WHEEL HOUSING (one) - R+R).
  • Assemble the engine compartment protection and fasten with its screws.
  • Assemble the front right wheel (see Op. 4450B10 WHEEL (one) front - R+R).
  • Lower the vehicle.
  • Connect the negative (-) battery terminal
Name Connector
- Battery A1
  • Close the engine compartment.
  • Remove the vehicle from the hoist.

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.