Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)02 · 10 Engine
02 · Engine

Refitting (page 2 of 4)

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Engine and power unit (899)
10 EngineRefitting · page 2 of 4

(Cont. Op. 1004B10)

  • Join the mileage counter transmission to the gearbox.
  • Complete with Op. 1076B50 Exhaust PIPE attachment to engine/manifold- R+R.
  • Lower the car.
  1. Tighten the constant velocity joint nuts to correct torque
FasteningComponentØValue (daNm)
1NutWHEEL HUBM2224.0

Note: Keep the brake pedal pressed down while tightening the nuts.

The constant velocity joint fastening nuts are to be replaced each time they are disassembled.

Diagram showing a tool being used to squeeze wheel hub nuts on a wheel assembly
  1. Use the tool to squeeze the wheel hub nuts
NameCode
1Tool1.875.063.000
Diagram showing a constant velocity joint nut being tightened on a wheel hub assembly
  • Connect the electrical connection of the engine oil pressure switch
NameConnector
-Engine oil pressure switchK30
  • Connect the earth cable
NameConnector
-Front right earthC11
  • Connect the electrical connection to the rev sensor
NameConnector
-Rev sensorK46
  • Insert the rev sensor cable in the mounting on the wheel housing.
  • Restore the electrical connection to the engine coolant temperature sender
NameConnector
-Engine coolant temperature senderK35
  • Fit the wiring in the straps on the engine head.
  • Electrically connect the alternator
NameConnector
-AlternatorA10

(Cont.)

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.