Refitting (page 4 of 4)
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Engine and power unit (899)
10 EngineRefitting · page 4 of 4
(Cont. Op. 1004B10)
- Complete with Op. 4450B12 Front WHEELS (two)
- R.R. - Lower the car.
- Fill the engine cooling circuit with coolant
| Type | Component | Name | Qty |
|---|---|---|---|
| (I) | Coolant ENGINE COOLING SYSTEM | Paraflu11 | 4.8 |
- Screw on the engine cooling circuit breather plug.
- Connect the negative (-) battery terminal
| Name | Connector |
|---|---|
| Battery | A1 |
- Remove car body protection covers.
- Close the engine compartment.
- Remove the vehicle from the hoist.
Parts & tools for this job For 1998 Fiat Seicento
- PARTEngine gasket setSearch: Fiat Seicento 1998 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.