1. Assemble the flywheel stop fixture

Make

Fiat

Model

Seicento Factory Service Manual

Year

1998–2010

Section

Timing system control (1108) › 1. Assemble the flywheel stop fixture

10 Engine1. Assemble the flywheel stop fixture

(Cont.Op.1032B44)

3. Remove the gearbox case guard.

1. Assemble the flywheel stop fixture

	Name	Code
1	Countertorque	1.860.846.000

1. Unscrew the toothed pulley screw.
2. Remove the toothed drive pulley.

Refitting

• Mount the toothed drive pulley.
• Tighten the toothed pulley screw to correct torque

	Fastening	Component	Ø	Value (daNm)
-	Screw	TOOTHED DRIVE PULLEY	M10	8.0

• Remove the flywheel stop fixture

	Name	Code
-	Countertorque	1.860.846.000

• Mount the gear case guard.
• Tighten the gear case guard screws to correct torque

	Fastening	Component	Ø	Value (daNm)
-	Screw	GEAR CASE GUARD	M6	0.5

02 Engine