10 Engine Tensioning value of used belt
(Cont. Op.1032B14)
Fastening
Component
Ø
Value (daNm)
-
Screw
BELT TIGHTENER
M10
5.0
Check the air conditioner compressor belt tension with the tool
Name
Code
-
Dynamometer
1.895.762.000
Tensioning value of used belt
Measure
Value
-
Tension (daN)
30 - 41
Tensioning value of new belt
Measure
Value
-
Tension (daN)
48 - 60
Assemble the timing system upper guard.
Assemble the wiring on the timing system upper guard.
Return the engine coolant supply tank to its position and tighten the fastening screws.
Complete with Op. 5540B10 HEADLAMP (one), lh or rh - R+R.Complete with Op. 7055B42 SUPPLEMENTARY WHEEL HOUSING (one) - R.R.Complete with Op. 4450B10 Front WHEEL (one) - R.R.Connect the negative (-) battery terminal
Name
Connector
-
Battery
A1
Remove the car body protection cover.
Remove the vehicle from the hoist.
1032B40 TOOTHED DRIVEN PULLEY (ONE) - R+R. WITH TIMING BELT REMOVED
Removal
Lock the toothed pulley with the tool
Name
Code
1
Countertorque
1.860.765.000
Unscrew the toothed pulley screw.
Remove the toothed driven pulley.
Refitting
Mount the toothed driven pulley.
Lock the toothed pulley with the tool
Name
Code
-
Countertorque
1.860.765.000
Tighten the toothed pulley screw to correct torque
Fastening
Component
Ø
Value (daNm)
-
Screw
TOOTHED DRIVEN PULLEY
M11
9.0
1032B44 TOOTHED DRIVE PULLEY- R+R. WITH TIMING BELT REMOVED
Removal
Loosen the gear case guard screw.
Unscrew the gear case guard screws.
(Cont.)
02 Engine
