Refitting
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Timing system control (1108) › Refitting
10 EngineRefitting
(Cont. Op. 1032D35)
- Unscrew the engine coolant supply tank screws.
- Move the engine coolant tank without detaching the pipes.
- Take out the wiring from the timing system upper guard.
- Unscrew the timing system upper guard screws.
- Remove the timing system upper guard.
- Unscrew the timing system lower guard screws.
- Remove the timing system lower guard.
Refitting
- Mount the timing system lower guard and tighten the fastening screws.
- Mount the timing system upper guard and tighten the fastening screws.
- Assemble the wiring on the timing system upper guard.
- Return the engine coolant supply tank to its position and tighten the fastening screws.
- Complete with Op. 5540B10 HEADLAMP (one), lh or rh - R+R.
- Complete with Op. 7055B42 SUPPLEMENTARY WHEEL HOUSING (one) - R+R.
- Complete with Op. 4450B10 Front WHEEL (one) - R.R.
- Connect the negative (-) battery terminal
| Name | Connector | |
|---|---|---|
| - | Battery | A1 |
- Remove the car body protection cover.
- Remove the vehicle from the hoist.
Parts & tools for this job For 1998 Fiat Seicento
- PARTEngine gasket setSearch: Fiat Seicento 1998 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.