Refitting (page 2 of 2)
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Anti-lock braking system (ABS)
33 Braking systemRefitting · page 2 of 2
(Cont. Op. 3340A80)
- Reposition the injection ECU and fasten the nuts.
- Connect the front right-hand wheel revolution sensor electrical connection.
| Name | Connector |
|---|---|
| RH ABS front wheel sensor | K71 |
- Complete with Op. 3340A12 ABS system hydraulic-electronic unit - R.R. - Including bleeding.
- Fit the ABS system fuse in the support.
| Name | Connector |
|---|---|
| ABS fuse (maxi fuse) | B07 |
- Fit the fuse group on the rear battery frame.
- Complete with Op. 5530B10 BATTERY - R.R.
- Remove the body protection cover.
- Close the engine compartment.
- Remove the vehicle from the shop jack.
Parts & tools for this job For 1998 Fiat Seicento
- TOOLOBD2 scanner with ABSSearch: OBD2 scanner ABS SRS
- TOOLDigital multimeterSearch: automotive digital multimeter
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.