Refitting
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Anti-lock braking system (ABS) › Refitting
33 Braking systemRefitting · page 1 of 5
(Continue Op. 3340A34)
| Name | Connector | |
|---|---|---|
| 1b | LH ABS rear wheel sensor | K75 |
| 1c | RH ABS rear wheel sensor | K76 |
Refitting
- Fit the revolution sensor and electrical wiring on the rear wheel hub and fasten it with its screw.
| Name | Connector | |
|---|---|---|
| - | LH ABS rear wheel sensor | K75 |
| - | RH ABS rear wheel sensor | K76 |
| - | Connect the rear wheel revolution sensor electrical connection. | |
| - | Complete with Op. 4450B11 Rear WHEEL (one) - R.R. | |
| - | Connect the battery (-) terminal. |
| Name | Connector | |
|---|---|---|
| - | Battery | A1 |
- Close the engine compartment.
- Remove the vehicle from the shop jack.
3340A80 - ABS SYSTEM WIRING HARNESS - R.R. OR REPLACEMENT
Removal
- Position the vehicle on a shop jack.
- Open the engine compartment.
- Assemble the body protection covers.
- Carry out Op. 5530B10 BATTERY - R.R.
- Lift the fuse group from the rear part of the battery frame.
- Lift the ABS fuse from the holder.
| Name | Connector | |
|---|---|---|
| 1 | ABS fuse (maxi fuse) | B07 |
(Cont.d)
Parts & tools for this job For 1998 Fiat Seicento
- TOOLOBD2 scanner with ABSSearch: OBD2 scanner ABS SRS
- TOOLDigital multimeterSearch: automotive digital multimeter
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.