Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)06 · 33 Braking system
06 · General

Refitting (page 5 of 5)

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Anti-lock braking system (ABS)
33 Braking systemRefitting · page 5 of 5

(Cont. Op. 3340A80)

  1. Loosen the nuts (1a) fastening the power steering ECU bracket (1b) and move the bracket aside.
Diagram showing power steering ECU bracket with callouts 1a and 1b
  • Loosen the fastening nuts and remove the footboard from the doors.
  1. Loosen the fastening screw (1a) and disconnect the earth (1b).
NameConnector
1bFront ABS earthC12
Diagram showing wiring harness connector and earth point with callouts 1a, 1b and F3
  • Disconnect the ABS wiring harness connector from the dashboard wiring harness.
  1. Lift the cap (1a) and loosen the lower front right-hand seat belt screw (1b).
Diagram showing seat belt screw and cap with callouts 1a and 1b
  • Perform Op. 7050A20 Single rear seat cushion - R.R.
  1. Loosen the rear fastening screws (1a) and lift the mat (1b) from the floor.
Diagram showing rear mat fastening screws and mat with callouts 1a and 1b

(Continued)

Illustrates removal of car's dashboard panel with screw fasteners

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.