Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)06 · 33 Braking system
06 · General

Refitting (page 4 of 5)

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Anti-lock braking system (ABS)
33 Braking systemRefitting · page 4 of 5

(Cont. Op. 3340A80)

  1. Loosen the ABS ECU brake fastening screw from the left-hand front wheelhouse.
Diagram showing the location of the ABS ECU brake fastening screw and rear nut in the wheelhouse area, with callout 1 pointing to the fastening nut.
  1. Loosen the fastening rear nut and remove the ABS ECU bracket.
Diagram showing the ABS ECU bracket being removed from the vehicle chassis, with callout 1 pointing to the mounting point.
  1. Loosen the screw (1a) and remove the fuel pipe fastening bracket (1b).
Diagram showing the engine compartment with callouts 1a pointing to a screw and 1b pointing to a fuel pipe fastening bracket.
  1. Partially remove the engine compartment gasket.
  2. Unscrew screws (2a) of the soundproofing guard (2b) and remove it.
Diagram showing the engine compartment with callouts 1, 2a pointing to screws, and 2b pointing to the soundproofing guard.
  • Lift the soundproofing guard lower bracket.
  1. Remove the ABS system wiring harness (1a) from the clips (1b).
Diagram showing the engine compartment with the ABS system wiring harness highlighted, with callouts 1a pointing to the harness and 1b pointing to the clips.

(Cont.d.)

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.