Refitting

(Op. 4420A40 continued)

Refitting

Before reconnecting the rear coil spring, check that there are no cracks or distortions that might adversely affect it.

Note: Rear coil springs are divided into two classes, identified by a stripe of yellow or green paint on the centre turn. The springs fitted on the vehicle must belong to the same class.

• Assemble the rear coil spring positioning it correctly between the upper support and the wishbone.
• Partially compress the suspension using a hydraulic jack.
• Complete with Op. 4420A30 Rear suspension DAMPER (one) lh or rh - R+R.
• Remove the hydraulic jack.
• Lower the car and remove it from the shop jack.

4420A44 - REAR SUSPENSION COIL SPRING (ONE - REMAINING) - R+R. FOLLOWING OP. 4420A40

• Refer to 4420A40 Rear suspension COIL SPRING (one) lh or rh - R+R.