Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)08 · 44 Suspension and wheels
08 · Steering & suspension

4420w - rear suspension guards overview

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Rear suspension › 4420w - rear suspension guards overview
44 Suspension and wheels4420w - rear suspension guards overview · page 1 of 2

4420W - REAR SUSPENSION GUARDS OVERVIEW

Illustrates wheel hub assembly with bolt and bearing components
Diagram of rear suspension components showing the rebound pad, spring, shock absorber, and fastening screws. Callout 1 points to the rebound pad. Regions F1 and F2 highlight specific areas.
Ref. Name
1 REAR REBOUND PAD

List of operations

Code Operation Validity
4420W10 Rear suspension rebound pad - Repl. with spring removed

OPERATIONS

4420W10 - REAR SUSPENSION REBOUND PAD - REPL. WITH SPRING REMOVED

Removal

  1. Slacken the fastening screw.
  2. Remove the rear rebound pad.
Close-up diagram of the rear suspension mounting point showing a tool slackening the fastening screw (callout 1) on the rear rebound pad assembly. Region F3 is highlighted.

Refitting

  • Assemble the rear rebound pad.
  • Tighten the fastening screw to the specified torque
Fastening Component Ø Value (daNm)
- Screw REAR REBOUND PAD M8 1.0

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.