5010a - heating water pipes overview (page 2 of 2)

(Cont. Op. 5010A12)

• Unscrew the engine coolant tank plug.
• Raise the vehicle.

1. Unscrew the engine compartment protection screws.
2. Remove the engine compartment protection.

1. Take out the engine coolant lower sleeve from the radiator and drain the fluid into a suitable container.

• Remove the engine coolant pipe from the straps on the rear of the engine cooling radiator.

1. Take out the sleeve from the coolant inlet rigid pipe to the water pump.

• Lower the vehicle.

1. Unscrew the engine coolant tank fastening screws and remove it from the support.
2. Take out the engine coolant pipe from the tank.

• Take out the water delivery pipe to the heater from the fastening straps.

1. Take out the fuses/relay group from the support, without disconnecting the electrical connections.
2. Partially remove the engine compartment gasket.

(Cont.d.)