Refitting

(Cont. Op. 5010A12)

1. Take out the water delivery pipe to the heater from the engine thermostat and remove it.

Refitting

Note: Before refitting the pipe check it is not damaged or has cracks that could influence the seal.

• Reposition the water delivery pipe and insert it on the heater.
• Insert the water delivery pipe to the heater on the engine thermostat.
• Assemble the soundproofing guard and fasten with its screws.
• Fit the engine compartment gasket.
• Reposition the fuses/relay unit and fit it on the support.
• Complete with Op. 5530B10 BATTERY - R.R.
• Connect the negative (-) battery terminal

• Fill the engine cooling system with coolant

• Screw the plug on the engine coolant tank.
• Remove the body protection cover.
• Close the engine compartment.
• Remove the vehicle from the shop jack.

5010A16 - WATER RETURN PIPE FROM THE HEATER - R.R.

Removal

• Position the vehicle on a shop jack.
• Open the engine compartment.
• Assemble the body protection covers.
• Disconnect the negative (-) battery terminal.

• Carry out Op. 5530B10 BATTERY - R.R.
• Carry out Op. 1048A10 COMPLETE AIR CLEANER - R.R.
• Unscrew the engine coolant tank plug.
• Raise the vehicle.

1. Unscrew the engine compartment protection screws.
2. Remove the engine compartment protection.

(Cont.d.)