Workshop Manuals Factory service & repair Fiat
01 00 General information and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 27 Axle06 33 Braking system07 41 Steering08 44 Suspension and wheels09 50 Auxiliary units10 55 Electrical equipment11 70 Bodywork12 Diagnosis13 Tests14 Wiring diagrams
Fiat Seicento Factory Service Manual (1998-2010)09 · 50 Auxiliary units
09 · General

Climate contro (page 2 of 2)

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Heating/ventilation, miscellaneous
50 Auxiliary unitsClimate contro · page 2 of 2

(Cont. Op. 5010A12)

  • Carry out Op. 5530B10 BATTERY - R.R.
  • Unscrew the engine coolant tank plug.
  • Raise the vehicle.
  1. Unscrew the engine compartment protection screws.
  2. Remove la engine compartment protection.
Diagram showing the lower sleeve and engine compartment protection area with callout numbers 1 and 2.
  1. Take out the lower sleeve from the radiator, drain off part of the engine coolant into a suitable container and reconnect the sleeve.
Diagram showing the fuses/relay group support and soundproofing guard area with callout number 1.
  • Assemble the engine compartment protection and fasten with its screws.
  • Lower the vehicle.
  1. Take off the fuses/relay group from the support and move it without disconnecting the electrical connections.
  2. Partially remove the engine compartment gasket.
  3. Unscrew screws (3a) of the soundproofing guard (3b)and remove it.
Diagram showing the water delivery pipe and heater area with callout numbers 1, 3a, and 3b.
  1. Take out the water delivery pipe from the heater.
Diagram showing the water delivery pipe connection point with callout number 1.

(Cont.d.)

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.