Refitting

(Op. 7005M20 continued)

1. Lower the window attachment plate by about 25 cm. and then loosen the retaining nuts (1a)on the window raising device upright and the retaining nuts(1b) securing the power window motor to the frame.

1. Disconnect the electrical connection (1a) from the power window motor and detach the window raising device (1b)from its seating.

Refitting

• Position the window raising device, tighten the retaining nuts of the power window motor and the retaining nuts of the window raising device upright.
• tighten the retaining bolts securing the window attachment plate and connect the electrical connection for the power window motor.
• Complete with Op. 7005A04 - FRONT SIDE DOOR WATER GUARD - R.R. or positioning with panel removed.

7005M21 - LH OR RH POWER WINDOW ON ONE FRONT DOOR - R.R.

Removal

• Carry out Op. 7005E34 - INTERNAL OR EXTERNAL MOULDING ON FRONT SIDE DOOR FRAME - R.R.
• Carry out Op. 7005E18 - FRONT SIDE DOOR ARM REST - R.R.
• Carry out Op. 7005E10 - FRONT SIDE DOOR INNER PANEL - R.R.
• Partly detach the water guard.
• Carry out Op. 7005M20 - LH or RH POWER WINDOW ON ONE FRONT DOOR - R.R. with door panel / support frame removed.

Refitting

• Complete with Op. 7005M20 - LH or RH POWER WINDOW ON ONE FRONT DOOR - R.R. with door panel / support frame removed.
• Reposition the water guard.
• Complete with Op. 7005E10 - FRONT SIDE DOOR INNER PANEL - R.R.
• Complete with Op. 7005E18 - FRONT SIDE DOOR ARMREST - R.R.
• Complete with Op. 7005E34 - INTERNAL OR EXTERNAL MOULDING ON FRONT SIDE DOOR FRAME - R.R.

7005M24 - MECHANISM OF LH OR RH POWER WINDOW ON ONE FRONT DOOR - R.R. CHECKING POSITION AND ATTACHMENT WITH DOOR PANEL REMOVED

• Refer to Op. 7005A04 - FRONT SIDE DOOR WATER GUARD - R.R. or positioning with door panel removed.

(Cont..)