Workshop Manuals Factory service & repair Fiat
01 00 General information and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 27 Axle06 33 Braking system07 41 Steering08 44 Suspension and wheels09 50 Auxiliary units10 55 Electrical equipment11 70 Bodywork12 Diagnosis13 Tests14 Wiring diagrams
Fiat Seicento Factory Service Manual (1998-2010)11 · 70 Bodywork
11 · Body & interior

Refitting

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Front side doors › Refitting
70 BodyworkRefitting

(Op. 7005N20 continued)

  1. Disconnect the electrical connection from the door lock.
NameConnector
1Front left-hand door lock motorN50
1Front right-hand door lock motorN51
  1. Loosen the retaining bolts (2a) and remove the wiring bundle support bracket(2b)from the door and move it to one side.
Diagram showing wiring bundle support bracket (2b) and retaining bolt (2a) on a door frame, with electrical connector labeled 1.
  1. Loosen the retaining bolts (1a) detach the door opening tie-rod (1b)and remove the lock.
Diagram showing retaining bolts (1a) and door opening tie-rod (1b) being removed from a door locking mechanism.

Refitting

  • Position the door locking device and secure it with the retaining bolts.
  • Refit the door opening and closing tie-rod.
  • Connect the door locking device electrical connection.
  • Fix the wiring carrier bracket using the retaining bolts.
  • Carry out Op. 7005D22 - WINDOW GUIDE (ONE) OF SIDE DOOR WINDOW DESCENDER - R.R. with door panel ( and support frame ) removed.
  • Carry out Op. 7005C35 - FRONT SIDE DOOR LOCK - R.R.
  • Reposition the water guard.

7005N21 - MOTOR / DOOR LOCKING SYSTEM ASSEMBLY ON ONE FRONT DOOR, LH OR RH - R.R.

Removal

  • Carry out Op. 7005E34 - INTERNAL OR EXTERNAL MOULDING ON FRONT SIDE DOOR FRAME - R.R.
  • Carry out Op. 7005E18 - FRONT SIDE DOOR ARM REST - R.R.
  • Carry out Op. 7005E10 - FRONT SIDE DOOR INNER PANEL - R.R.
  • Partly detach the water guard.
  • Carry out Op. 7005N20 - MOTOR / DOOR LOCKING SYSTEM ASSEMBLY ON ONE FRONT DOOR, LH or RH - R.R. with door panel and support frame removed.

Refitting

  • Complete with Op. 7005N20 - MOTOR / DOOR LOCKING SYSTEM ASSEMBLY ON ONE FRONT DOOR, LH or RH - R.R. with door panel and support frame removed.
  • Reposition the water guard.
  • Complete with Op. 7005E10 - FRONT SIDE DOOR INNER PANEL - R.R.
  • Complete with Op. 7005E18 - FRONT SIDE DOOR ARMREST - R.R.
  • Complete with Op. 7005E34 - INTERNAL OR EXTERNAL MOULDING ON FRONT SIDE DOOR FRAME - R.R.

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.