Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)11 · 70 Bodywork
11 · Body & interior

Removal

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Interior trim and upholstery › Removal
70 BodyworkRemoval

Removal

  1. Remove snap fasteners (1a) fixing load compartment trimming to backrest, with proper tool (1b).
DescriptionCode
1bRemoving knife1.878.077.000.
  1. Remove load compartment trimming.
Diagram showing the rear seat backrest and load compartment area with callout numbers 1a, 1b, and 2 indicating components for removal.

Reassembly

  • Check trim in order to verify it is not damaged.
  • Reassemble load compartment trimming in its seat.
  • Place snap fasteners.
Illustrates removal of rear bumper cover with tool

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.