7015b36 - barrel for key locking - r.r.

7015B36 - BARREL FOR KEY LOCKING - R.R.

Removal

• Carry out Op. 7015B10 - HATCHBACK DOOR SINGLE LOCK - R.R. or repair with panel/protection removed.

1. Unscrew the screws(1a) of the barrel fixing plate(1b) the hatchback door and remove it.

Reassembly

• Assemble the barrel and screw the fixing screws.
• Complete with Op. 7015B10 - HATCHBACK DOOR SINGLE LOCK - R.R. or repair with panel/protection removed.

7015B38 - BARREL FOR KEY LOCKING - REPLACE WITH UNEQUAL ONE

Removal

It is not possible to order only one barrel for key or to order barrels with the spare part code.
For barrel order observe the proper procedure shown in 5520A - starting.

• Carry out Op. 7015B10 - HATCHBACK DOOR SINGLE LOCK - R.R. or repair with panel/protection removed.
• Carry out Op. 7015B36 - BARREL FOR KEY LOCKING - R.R.

1. Remove the fixing clip (1a)and, keeping the key inserted, remove the barrel (1b).

Reassembly

• Check the barrel so as to verify it is not damaged.
• Place the barrel for key in its seat and insert the clip.
• Complete with Op. 7015B36 - BARREL FOR KEY LOCKING - R.R.
• Complete with Op. 7015B10 - HATCHBACK DOOR SINGLE LOCK - R.R. or repair with panel/protection removed.

7015B42 - HATCHBACK DOOR INNER UNLOCKING CONTROL - S.R.

Removal

• Carry out Op. 7045A10 - FRONT SEAT (one), lh or rh - R.R.
• Carry out Op. 7040L40 -SILL BOARD OF A DOOR OPENING , lh or rh - R.R.
• Move, in a proper way,the rear shelf.

(Cont..)