Diagnosis table
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Alarms › Diagnosis table
DiagnosisDiagnosis table
Diagnosis table
A06 Alarm direction indicators do not flash
When the alarm is turned on the direction indicators do not flash
NOTE: direction indicator flashing may or may not be activated, according to the legislation in force in the specific countries (see DESCRIPTION AND OPERATION: 5580E)
| Step | Validity | Operations to be performed | Test results | ||
|---|---|---|---|---|---|
| OK | ⚠ | 🔧 | |||
| 1 | CHECK WITH DIAGNOSTIC TOOL | Connect the diagnostic tool (Examiner or other tool) to the diagnostic socket. Check the following in sequence: – no errors in the alarm ECU – all parameters are plausible |
All OK Go to Step 2 |
Problems found No dialogue between the diagnostic tool and the ECU or receiver. |
Intervention Restore connection between ECU and diagnostic socket (Wiring diagram E7015 "ALARM") |
| Error detected in ECU or receiver. | Continue as shown by the diagnostic tool. | ||||
| 2 | ACTIVE TESTS WITH THE DIAGNOSTIC TOOL | Perform the direction indicator operation active diagnosis with the diagnostic tool (Examiner or other tool). | All OK Go to Step 3 |
Problems found Lights do not work |
Intervention Restore connection between alarm ECU and lights (Wiring diagram E2020 "Direction indicators/hazard lights") |
| 3 | CHECK CORRECT OPERATION | Check the fault has been repaired | All OK End of test |
Problems found The fault persists |
Intervention Replace the alarm ECU OP. PROCEDURE 5580E46 |
Parts & tools for this job For 1998 Fiat Seicento
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Seicento
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.