I01 Side/tailights - number plate light do not work
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Lights › I01 Side/tailights - number plate light do not work
DiagnosisI01 Side/tailights - number plate light do not work
I01 Side/tailights - number plate light do not work
101 Side/taillights - number plate light do not work
When the key is at MAR operating the knurled ring of the steering column lever unit either the side/taillights or the number plate light do not work
Preliminarily check
– protection fuses (F4 and F5)
| Step | Validity | Operation to be performed | Test results | ||
|---|---|---|---|---|---|
| OK | ⚠ | 🔧 | |||
| 1 | CHECK SINGLE LIGHTS | Check that the single bulbs and the bulb holders are intact | All OK | Problems found | Intervention |
| Go to Step 2 | Bulbs damaged | Replace bulbs | |||
| Faulty bulb holder | Restore or replace: – rear light cluster PROCEDURE OP. 5540A44 – front light cluster PROCEDURE OP. 5540B26 – number plate lights PROCEDURE OP. 5540A94 |
||||
| 2 | CHECK SIDE/TAILLIGHT ELECTRIC CIRCUIT | Check in sequence – connections between ignition switch, junction unit and steering column lever unit – bulb earth (Wiring diagram E2010 "Side/taillights") |
All OK | Problems found | Intervention |
| Go to Step 3 | Connections cut off | Restore connections | |||
| 3 | CHECK STEERING COLUMN LEVER UNIT | Check correct operation of steering column lever unit: in particular the Side/taillight switch: DESCRIPTION AND OPERATION 5550A | All OK | Problems found | Intervention |
| Go to Step 4 | steering column lever unit does not work correctly | Replace steering column lever unit PROCEDURE OP. 5550A10 (PROCEDURE OP. 5550A12 versions with airbag) |
|||
| 4 | CHECK SWITCH | Check the side/taillights come on when turning the ignition key in the opposite direction | All OK | Problems found | Intervention |
| Go to Step 5 | Faulty ignition switch | Restore or replace ignition switch PROCEDURE OP. 5520A10 (PROCEDURE OP. 5520A12 versions with airbag) |
|||
| 5 | CHECK CORRECT OPERATION | Check the fault is no longer present | All OK | Problems found | Intervention |
| End of test | – | – | |||
Parts & tools for this job For 1998 Fiat Seicento
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Seicento
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.