Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)12 · Diagnosis
12 · Diagnostics

I50 Inside lights do not work

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Lights › I50 Inside lights do not work
DiagnosisI50 Inside lights do not work

I50 Inside lights do not work

Operating the corresponding switches, the inside lights do not work

Step Validity Operation to be performed Test results
OK ⚠ 🔧
1 CHECK SINGLE LIGHTS All OK
Go to Step 2		 Problems found Intervention
Check that the single bulbs and the bulb holders (containing the light switches)are intact Damaged bulb Replace bulb
Faulty bulb holder Restore or replace bulb holder
2 CHECK BUTTONS ON DOORS All OK
Go to Step 3		 Problems found Intervention
Check intactness of the ceiling light control button in the doors Damaged button Replace damaged button PROCEDURE OP. 5545A62
3 CHECK INSIDE LIGHT ELECTRIC CIRCUIT All OK
Go to Step 4		 Problems found Intervention
Check in sequence:
– protection fuse (F15)
– connections between bulb and switch inside the ceiling light
– connections between switch and earth
(Wiring diagrams: E2510 "Ceiling lights")		 Faulty component Replace component (if it is a fuse investigate the cause that may have triggered it)
Connections cut off Restore connections
4 CHECK CORRECT OPERATION All OK
End of test		 Problems found Intervention
Check the fault is no longer present – –

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.