I11 Direction indicators/hazard lights do not flash
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Lights › I11 Direction indicators/hazard lights do not flash
DiagnosisI11 Direction indicators/hazard lights do not flash
I11 Direction indicators/hazard lights do not flash
Raising or lowering the lever on the steering column lever unit, the key at MAR, or pressing the corresponding button at the centre of the dashboard, the direction indicators/hazard lights work but do not flash correctly.
If they do not work at all, see table I10
IMPORTANT: if one of the bulbs is not working, the flashing of the other will be affected. Therefore, also see table I10
| Step | Validity | Operation to be performed | Test results | ||
|---|---|---|---|---|---|
| OK | ⚠ | 🔧 | |||
| 1 | CHECK INTERMITTENCE STEERING COLUMN LEVER UNIT | All OK | Problems found | Intervention | |
| Check correct operation of steering column lever unit (in particular, the intermittence located in the junction unit): DESCRIPTION AND OPERATION 5550A | Go to Step 2 |
Faulty intermittence | Replace intermittence | ||
| Steering column lever unit does not work correctly | Replace steering column lever unit PROCEDURE OP. 5550A10 (PROCEDURE OP. 5550A12 versions with airbag) |
||||
| 2 | CHECK CORRECT OPERATION | All OK | Problems found | Intervention | |
| Check the fault is no longer present | End of test | – | – | ||
Parts & tools for this job For 1998 Fiat Seicento
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Seicento
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.