LEFT SLIDING REAR SEAT - R.R.

Operation 7050A06 · Rear seat assembly

Removing

- 5530B56 BATTERY DRIP TRAY COVER - R.R.

Disconnect the battery negative terminal.

Move the left rear seat completely back.

1. Undo the front bolts fixing the rear seat.

1. Extract the seat belt about 30 cm and lock it as illustrated.

This precautionary measure is needed to facilitate the operation of refitting the seat.

Move the left rear seat forwards into the end of travel position.

Open the boot lid.

Remove the front and rear parcel shelf.

- 7040B10 load platform (luggage platform) trim - r+r

1. Undo the rear bolts (1a) fixing the seat and the rear seat belt (1b).

Disconnect the Side Bag electrical connector.

Remove the left rear seat.

Refitting

Position the seat in the passenger compartment by the fastenings.

Connect the Side Bag electrical connector.

Insert the seat belt in the special passage in the seat cushion.

Tighten the front and rear bolts fixing the rear seat and the rear seat belt to torque.

Release the rear seat belt from the retainer used during the dismantling.

- 7040B10 load platform (luggage platform) trim - r+r

Fit the front and rear parcel shelf.

Connect the battery negative terminal.

- 5530B56 BATTERY DRIP TRAY COVER - R.R.