Rear seat BACKREST locking/release CABLE - R.R.

Operation 7050A74 · Rear seat assembly

Removing

- 5530B56 BATTERY DRIP TRAY COVER - R.R.

Disconnect the battery negative terminal.

- 7050A13 SPLIT rear. seat LEFT BACKREST- R.R.

Separate the backrest frame from the upholstery and cover, not separating the last two components: - 7050D35 LEFT rear seat BACKREST COVER, (two seats) - R.R. with backrest removed

1. Undo the bolts (1a) fixing the backrest locking/release device (1b).

1. Release the flexible cable (1a) from the retaining clips (1b) on the backrest frame.

Remove the backrest locking/release device.

Refitting

Secure the flexible cable to the retaining clips on the backrest frame.

Place the backrest locking/release device in position and tighten the fixing bolts to torque.

Check that the cable is working properly.

Fit the cover complete with upholstery on the frame referring to op.: - 7050D35 LEFT rear seat BACKREST COVER, (two seats) - R.R. with backrest removed

- 7050A13 SPLIT rear. seat LEFT BACKREST- R.R.

Connect the battery negative terminal.

- 5530B56 BATTERY DRIP TRAY COVER - R.R.