FRONT BRAKE CALIPER (one) - R.R.
- Make
- Fiat
- Model
- Stilo Factory Service Manual
- Year
- 2001–2007
- Section
- Disc brakes › FRONT BRAKE CALIPER (one) - R.R.
FRONT BRAKE CALIPER (one) - R.R.
Removing
Position the vehicle on the ramp.
- 5530B56 BATTERY DRIP TRAY COVER - R.R.
Disconnect the battery negative terminal.
- 4450B10 Front WHEEL (one) - R.R.
1. Use the special tool to unscrew the brake pipe connector.
| Name | Country | |
|---|---|---|
| Box wrench for brake fittings | 1.856.132.000 |
Release the brake pipe rubber retainer from its seat.
1. Disconnect the electrical connection for the brake pad wear sensor (only on left side).
| Name | Connector | |
|---|---|---|
| 1 | Left brake pad wear sensor (switch) | K20 |
2. Unscrew the brake caliper retaining bolts.
3. Remove the brake caliper.
Refitting
Fit the brake caliper.
Tighten the brake caliper bolts to torque.
| Fastening | Component | Ø | Value (daNm) |
|---|
Connect the electrical connection for the brake pad wear sensor (only on the left side)
| Name | Connector | |
|---|---|---|
| Left brake pad wear sensor (switch) | K20 |
Secure the brake pipe rubber retainer in its seat.
Use the special tool to tighten the brake pipe connection to torque.
| Name | Country | |
|---|---|---|
| Box wrench for brake fittings | 1.856.132.000 |
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| HOSE TO REAR BRAKE CALIPER | M10 | 1.4 |
- 0010T64 brake and or clutch fluid check level and top up as necessary
- 0010T65 hydraulic brake system bleed air
- 4450B10 Front WHEEL (one) - R.R.
Connect the battery negative terminal.
Parts & tools for this job For 2001 Fiat Stilo
- PARTFront brake padsSearch: Fiat Stilo 2001 front brake pads
- TOOLCaliper piston rewind toolSearch: brake caliper piston rewind tool
- FLUIDBrake fluidSearch: brake fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.