Front brake calliper bracket - r r
- Make
- Fiat
- Model
- Stilo Factory Service Manual
- Year
- 2001–2007
- Section
- Disc brakes › Front brake calliper bracket - r r
Front brake calliper bracket - r r
Removing
Position the vehicle on the ramp.
- 5530B56 BATTERY DRIP TRAY COVER - R.R.
Disconnect the battery negative terminal.
- 4450B10 Front WHEEL (one) - R.R.
Unscrew the bolt securing the pad wear sensor cable bracket.
1. Disconnect the electrical connection for the brake pad wear sensor (only on left side).
| Name | Connector | |
|---|---|---|
| 1 | Left brake pad wear sensor (switch) | K20 |
2. Undo the brake caliper retaining bolts.
Place the brake caliper to one side.
1. Undo caliper bracket bolts (1a) and remove the bracket (1b).
Refitting
Fit the caliper bracket and tighten the bolts to torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| Bolt | FRONT BRAKE CALIPER BRACKET | M12 x 1 | 10.5 |
Refit the brake caliper and tighten the bolts to torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| Bolt | FRONT BRAKE CALIPER PINS | M10 x 1 | 7 |
Connect the electrical connection for the brake pad wear sensor (only on left side).
| Name | Connector | |
|---|---|---|
| Left brake pad wear sensor (switch) | K20 |
Tighten the bolt securing the brake pad wear sensor bracket bolt (only for the left side).
- 4450B10 Front WHEEL (one) - R.R.
Connect the battery negative terminal.
- 5530B56 BATTERY DRIP TRAY COVER - R.R.
Remove the car from the ramps.
Parts & tools for this job For 2001 Fiat Stilo
- PARTBrake padsSearch: Fiat Stilo 2001 brake pads
- TOOLBrake bleeder kitSearch: one man brake bleeder kit
- FLUIDBrake fluidSearch: brake fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.