Rear brake discs r r

Operation 3310B50 · REAR DISC BRAKES

Removing

Position the vehicle on the ramp.

1. Release the plastic guard on the rear part of the tunnel.

2. Loosen the handbrake adjustment bolt.

Raise the vehicle.

- 4450B11 WHEEL (one) rear - R.R.

1. Disconnect the handbrake cable from the connection on the rear caliper.

2. Unscrew the rear caliper mount retaining bolts.

Prise up the caliper complete with rear brake bracket.

1. Unscrew the brake disc retaining pins (1a) and remove brake discs (2b).

Refitting

Position the rear brake discs and tighten the retaining studs.

Position the brake caliper complete with mount and tighten the bolts securing the caliper mount to the rear axle to torque.

Secure the handbrake cable to the brake caliper.

- 4450B13 rear wheels(2) r r

Lower the vehicle.

- 3380A04 handbrake - check travel

Remove the car from the ramp.