22 · Diagnostics

Display does not show outside temperature

Make: Fiat
Model: Stilo Factory Service Manual
Year: 2001–2007
Section: Instrument panel › Display does not show outside temperature

‹ Prev Milometer not working Next › Doors open check not working

Fault diagnosisDisplay does not show outside temperature

DISPLAY DOES NOT SHOW OUTSIDE TEMPERATURE

With the ignition ON the matrix that can be reconfigured does not display the outside temeprature;

The temperature information is supplied to the instrument panel node by the driver's door node via the B-CAN network;

0	PRELIMINARY CHECK	All OK	Problems met	Operation
		Results of the tests
	Check that with the ignition switched ON: that there are no dashes displayed in place of the temperature that there are no failure messages displayed that the audio, telephone, navigator, cruise control functions are not activated	Continue to Step 2	Display shows information described	Restore the standard screen on the matrix that can be reconfigured
		Continue to Step 2	Display shows information described	Continue to Step 1
1	CHECKING WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Connect the diagnostic equipment (Examiner or other instruments) and check the CAN network information: control units inactive control unit errors control units with errors in CAN line	Continue to Step 2	Presence of faults in the CAN network	Continue following the instructions for the diagnostic equipment
		Continue to Step 2	Presence of errors at the instrument panel node	Continue to Step 2
2	CHECKING WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Keeping the diagnostic equipment (Examiner or other instruments) connected to the diagnostic socket, check: that there are no faults at the instrument panel node	Continue to Step 3	Presence of errors or failed dialogue with the diagnostic equipment	Continue following the instructions for the diagnostic equipment
3	CHECKING WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Keeping the diagnostic equipment (Examiner or other instruments) connected to the diagnostic socket, check: the operation of the matrix that can be reconfigured through active diagnosis.	Continue to Step 4	Display that can be reconfigured not working	Replace instrument panel Op. 5560B11
4	CHECKING CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present		The fault persists	Search for the fault starting from another symptom'

‹ Prev Milometer not working Next › Doors open check not working

Parts & tools for this job For 2001 Fiat Stilo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.